Build cleaner custom cables with the George L’s .155 plug. This compact right-angle solderless connector lets you create the cable length your rig actually needs without reaching for a soldering iron.

Long patch cables create unnecessary clutter, while cables that are too short can pull against pedals and connections. The right-angle design helps you route George L’s .155 cable around closely spaced pedals, rack equipment, and other tight installations. It is a practical choice when reorganizing a pedalboard, replacing a compatible connector, or building a cable for a specific setup.

Clean Cable Routing Without Soldering

The George L’s .155 plug uses a solderless assembly system. According to the manufacturer’s instructions, the compatible cable should be cut straight across and inserted into the connector until fully seated. The cable then bends into the side slot before the top is reinstalled and tightened. The completed cable should always be tested before use.

For illustrated assembly guidance, review the official George L’s cable and plug instructions.

Designed Specifically for .155 Cable

This connector fits George L’s .155-diameter cable. It is not interchangeable with the larger George L’s .225 cable or connectors designed for other cable systems. Confirm your cable size before ordering so the connector seats and assembles correctly.

The compact format works especially well for pedalboards where straight connectors may take up too much room. Right-angle routing can also help keep cables organized along the edge of a board or around rack-mounted equipment.

Key Features

• George L’s right-angle cable connector
• Designed for George L’s .155 cable
• Solderless assembly—no soldering iron required
• Compact design for tight pedalboard layouts
• Useful for custom-length patch and equipment cables
• Not compatible with George L’s .225 cable

Complete Your Cable Setup

Need a different connection angle? Pair this right-angle connector with a George L’s .155 straight cable plug to build a cable that fits your pedalboard, rack, studio, or stage setup.

Choose the George L’s .155 plug when you need a compact right-angle connection and control over your cable length. Confirm compatibility, assemble it according to George L’s instructions, test the finished cable, and put your rig back to work.